From: J & D Goldman (jmgoldma_at_dwx.com)
Date: 03/26/03
Message-ID: <005401c2f408$b82148e0$02dececf@gateway> From: "J & D Goldman" <jmgoldma_at_dwx.com> Subject: Re: 4-frequency model - and domes in the sand Date: Wed, 26 Mar 2003 20:29:38 -0600
As to Christine's model and page, nice work.
>>http://www.sassafraswilds.net/domehome/4freqmodelpg01.html
>>But this next page has just debuted:
>>http://www.sassafraswilds.net/domehome/4freqmodelpg02.html
One thing that makes my model work go a bit faster and easier is using
a glue stick and a pair of tweezers with a flat edge. If you smear
some gluestick on both flaps and then use the tweezers to give the
flaps a good squeeze very close to the fold at the triangle face, it
make a real good seal rather quickly. If something gets out of place,
you do have a few seconds to pull it apart and reposition if
necessary. You may find you won't even need the paper clips unless
the paper is pulling apart with some gusto.
On another note, one of the dome company principles I've talked to did
quite a business in domes for Desert Storm to help keep sand out of
the jets. I wonder if that is being done in the current military
campaign? So far, I've seen nothing but straight side tents in
pictures.